How Long Does It take to change a tire? | Complete Guide and Breakdown[2021]


How Long Does It take to change a tire

How Long Does It take to change a tire? If a stray nail, sharp rock, or any other hazard was the cause of your flat tire, one thing is sure: flat tires are an enormous disadvantage. In this article, we will be addressing questions like “how long does it take to change a tire.” Continue reading to find out more. 

How Long Does It take to change a tire?

Tire changes typically take 30-45 minutes for all four tires. This figure is dependent on the equipment you’re using, as better tools can make the process go much faster. For example, an impact torque wrench, rather than a tire iron, can make loosening your tire’s lug nuts much quicker if you’re mounting your tires yourself. To lift the wheels, you’ll need a jack. When you replace your tires, don’t forget to rotate them as well.

Try not to rely on your cell phone to save you in an emergency. There’s always the risk that you’ll forget to charge it, run out of battery, or leave it at home. In addition, flat tires can occur anywhere, and knowing how to change a flat tire cannot be learned from a cell phone. Now that you are aware of “How Long Does It take to change a tire,” let’s go into more detail? 

How Long Does It take to change a tire?
How Long Does It take to change a tire?

What do you need for a flat tire?

  • Jack
  • Wheel wedge
  • Raincoat (for when it is raining)
  • Flashlight
  • Spare tire
  • Wrench for lug
  • The spare tire is fully inflated.
  • Owner’s manual for your vehicle

Recommended: Service Brake Assist | A Complete Breakdown on All You Need To Know [2021]

What are the steps to change a flat tire?

The knowledge on the question of “How Long Does It take to change a tire” isn’t enough. Knowing how to change your tire is also very important. 

Is changing a flat tire easy? Yes, it is if you follow some simple steps. First, do not abruptly brake or turn when you realize you have a flat tire. Instead, reduce your speed gradually and scan the area for a level, straight stretch of road with a wide shoulder. 

Note: Try not to change a tire on a narrow shoulder near oncoming traffic. Continue to move until you reach a safer location. While driving on flat tire risks damaging the rim, replacing an edge is preferable to be hit by an unobservant driver.

A parking lot that isn’t full would be ideal. It’s preferable to have level ground because it will keep your vehicle from rolling. Furthermore, straight road sections are preferable to curves because oncoming traffic is more likely to notice you.

  • Step one: hazard lights should be on. Other drivers will be able to see you on the side of the road thanks to your hazard lights or “flashers.” Turn them on as soon as you realize you need to pull over to avoid an accident.
  • Step two: use the parking brakes. When preparing to replace a flat tire, always use the parking brake once you’ve reached a complete stop. This will reduce the chances of your vehicle rolling.
  • Step three: wedges should be applied to the wheel. Wheel wedges are placed in front or behind the tires to keep the vehicle rolling while the flat tire is being repaired. Place these in front of the front tires if you’re changing a back tire. Put the wheel wedges behind the back tires if your flat tire is on the show.
  • Step four: hubcap or wheel cover must be removed. If a hubcap covers your vehicle’s lug nuts, separating the hubcap while using the jack to lift the car is more accessible. You can skip to Step 6 if your lug nuts are exposed. Remove the hubcap with the flat end of your lug wrench. Most vehicles will work with this method, but some hubcaps will require a different tool to remove. Remove the hubcap or wheel cover according to the instructions in your owner’s manual.
  • Step five: lug nuts are to be loosened. Turn the lug nuts counterclockwise with the lug wrench until they are no longer resistant. It’s OK if you have to use force. If necessary, use your foot or your entire body weight.
  • Step six: place your jack under the car. The best location for the jack is usually beneath the vehicle frame, next to the flat tire. Follow the jack placement instructions in your vehicle owner’s manual to lift safely and avoid damage to the vehicle.
  • Step seven: Next, remove the flat tire by unscrewing the lug nuts. Next, all you have to do is remove the lug nuts altogether. You should be able to unscrew them mostly by hand now that you’ve already loosened them. Next, carefully remove the flat tire.
  • Step eight: hand tighten the lug nuts and mount the spare tire. By aligning the rim with the lug bolts, you can now install the spare on the hub. Push gently through the edge until the lug bolts are visible. Replace the lug nuts on the lug bolts and hand tighten them completely. Check each one once more after they’re all on, drawing as much as you can. After you’ve lowered the vehicle to the ground, use the wrench to tighten them.
  • Step nine: check the pressure in the spare tire and replace the hubcap. If the hubcap you removed off the flat tire fits your spare, replace it the same manner you removed it. If it doesn’t work, stow it with the tire while storing your gear. Before you leave, don’t forget to load them all into your vehicle. To ensure that the spare tire is safe to drive on, check the tire pressure. Temporary spares, sometimes known as “mini-spares,” require 60 psi (420 kPa). If a tire requires air, drive (slowly) to a service station right away.

How To Change A Flat Tire

From Visually.

There is so much more to discuss on the topic of “How Long Does It take to change a tire,” read on as we go into more details.

Recommended: What is Good Mileage for Used Cars? | Understanding the 12,000 Miles Rule

Video Guide

Still need more information on How Long Does It take to change a tire? Watch this video guide:

Do I need an alignment after replacing tires?

After installing new tires on your vehicle, it’s a good idea to get a wheel alignment. This is because wheel alignment can help you get the most out of your tires while extending their lifespan.

Changing out your winter or summer tires is vital, even if it might be a pain at the beginning and end of the seasons. By doing so for all of your journeys, you and your passengers will be significantly safer and have a much more excellent grip on the road.

The tires will meet the road in the correct direction and angle when you conduct the wheel alignment, as specified in your vehicle’s owner’s manual. When your wheels are correctly aligned, you will notice that your vehicle travels straight and does not tilt to one side more than the other.

Recommended: 10 Easy Steps To Knowing How Much Oil your Car Needs And Changing Engine Oil

Is it wrong to drive your car with a flat tire?

The answer to “How Long Does It take to change a tire” has been given. However, before you change your tire, can you drive your car with a flat tire? No, it would help if you did not go with a flat tire.

However, when pulling over to the side of the road, it may be necessary to go a short distance with a flat tire. Driving on a flat tire, on the other hand, is a definite method to endanger your passengers and severely damage your vehicle. You can typically drive 50 miles at up to 50 mph on a punctured tire if your car is equipped with Bridgestone Run-Flat tires.

So, if you can’t drive with a flat tire, what should you do instead? The first step is to carefully pull over to the side of the road to address the issue adequately. 

To begin, replace the flat with your spare tire or fix any punctures using an emergency sealant. It’s worth mentioning, too, that emergency sealants usually only work on punches of 14 inches or less. If your tire is destroyed, blown out, or has a severe point, they will not assist you.

Media credit: Car And Driver

Why are Walmart tires so cheap?

When compared to Costco, Walmart’s tires are relatively inexpensive. There are a variety of reasons for this low cost. Is it a fallacy that Walmart tires are of inferior quality to tires purchased elsewhere? All of these queries indicate considerable skepticism about Walmart’s ability to deliver high-quality tires. Walmart is a massive corporation that offers a diverse range of tires from various manufacturers, some of which are of excellent quality and others that are not. 

How Long Does It take to change a tire: Wrapping up

Now that we have discussed “how Long Does It take to change a tire” and how to fix your tire, you should have all you need. We hope the information in this content has been of help to you. We have covered a lot of ground on the topic “How Long Does It take to change a tire.” Would you like to learn more about how to take better care of your car? Please take a look at our other articles to learn more. 



Leave a Reply

Your email address will not be published. Required fields are marked *