How to rev an engine in a few easy steps | Complete Video Guide Included [2021]


how to rev an engine

Are you a fan of automobile engineering? In the world of motorsports, you’ve probably heard the term “revving an engine.” The engine rev is the sound that is produced when the engine speed is rapidly increased. It is most commonly linked with sporting showmanship, but it serves a variety of objectives. Knowing how to rev an engine is an easy way to keep your automobile in good shape. 

Rev an engine with these easy steps:

  • Step one: The engine should be running before you rev it up. This requires you should switch it on.
  • Step two: Allow the vehicle to stay idle for 20-30 seconds after turning it on. During this period, oil circulates through the engine’s moving parts. Because revving causes a lot of movement in the engine, lubricating its parts prevents harm.
  • Step three: Then, you press the accelerator while shifting the gear stick to neutral. The engine will move smoothly as a result of the oiling. As you press harder on the gas pedal, the needle on the tachometer will begin to move, climbing to higher numbers.
  • Step four: Finally, make sure you monitor the RPM dial. This is to ensure that the needle doesn’t hit the redline. When shifting from neutral to drive while revving, maintain a steady and alert demeanor. 

Anyone who wants to learn how to rev an engine must first understand why they are doing so. The good news is that this article will teach you everything you need to know about revving an engine and how to do it effectively.

What Does It Mean To Rev An Engine?

When you rev an engine, you’re increasing the speed of your car’s engine, which produces a distinct sound. The sound gets louder as you press harder on the gas pedal, indicating that the revs are going up.

The basic goal of revving a car is to increase oil circulation. It’s based on drag racing cars’ need for a faster RPM to circulate enough oil. If the engine was idle, the oil supply was severely depleted.

Note: You put additional stress on your car when you rev an engine. When it’s cold outside, revving your engine before it’s warmed up is extremely dangerous since the engine’s oil hasn’t had enough time to circulate and adequately lubricate your vehicle.

When it’s cold outside, revving the engine up can help it warm up to the point where it can move. This is especially true in colder climates, when the engine may stall due to the cold. 

Video tutorial on how to rev an engine

Learning how to rev an engine with precise written steps is great. However, it is even better with great visual aid. This article delves deeper into the concept of revving your car. We have examined what it is, and we will be going into the benefits it provides. Take advantage of this Youtube video below to get a better understanding of how to rev your engine.

Do you rev your engine in park or neutral?

To rev an engine, do so when the car is in park. When you rev the engine while the automobile is in neutral, it can roll forward or backward.

how to rev an engine
how to rev an engine

How to rev an engine when it is parked

When your automobile is parked, you can also rev the engine, which many people learn about it. When revving up a parked car, follow the methods outlined below.

  • Step one: It (your car) must be turned on and left in this state for up to 30 seconds. This, as previously said, permits the oil to circulate.
  • Step two: Next, set the stick to parking mode to prevent the car from moving forward or backward.
  • Step three: lastly, steadily pressing down on the gas pedal, rev the engine. Watch the tachometer to make sure the needle doesn’t approach the redline.

Transmission tip

Handling the transmission correctly might be challenging. We’ll go through a few ways that shifting properly might help you extend the life of your transmission. First, never put your car in park or reverse while driving. Then, instead of shifting into park and speeding away, apply the E brake. The transmission will take the brunt of your car’s weight rather than the brake when you do this.

Is There Any Benefit to Revving Your Engine?

Finding out now is a wise move. It might be too late by the time you inquire, “Is it bad to rev your engine?” Most likely, you will be forced to undertake costly repairs. On the other hand, if you prefer to drive fast and show off how powerful your automobile is, you’ll most likely spend some time revving your engine. 

It’s something that comes with the territory for individuals who own cars with large engines. However, if you don’t have to, there isn’t much point in revving your engine. Although revving your engine constantly will help you produce more power, you may end up putting your engine at risk.

Is It Bad to Rev Your Engine?

Are you wondering if it was bad to rev an engine? You might be wondering if revving an engine is harmful; let’s give you the answers you need. If you mistakenly rev your car’s engine now and then, it’s unlikely that you’ll cause too much damage to it. 

Frequent engine revving is a definite means to create issues for your engine. For example, suppose you keep revving your engine over and over. That said, in most cases, you will need to have your engine or another part of your automobile repaired.

When a person is waiting for their automobile to warm up, it’s fairly uncommon for them to mistakenly press harder on the gas pedal than they intended, causing the engine to rev.

how to rev an engine
how to rev an engine

Should I rev the engine before turning off the ignition?

Some drivers consider revving their engine several times before shutting it down to clear anything clogging the crankcase. As a result, it is expelled through the tailpipe. 

Another interesting theory holds that when you rev an engine, the float chamber in the carburetor fills up. When cold starts are common, this speeds up ignition the next morning. 

However, this method only benefits old-school engines and has become obsolete compared to modern ones. For starters, the float chamber was designed to remain full even when the engine was turned off.

To wrap this up…

Revving the engine before shut down not only wastes gasoline, increases tailpipe emissions, and contributes to noise pollution, but it also accelerates wear on the engine’s moving parts, particularly the pistons and crankshaft. 

Because the turbocharger needs time to spool down before the ignition is switched off, this behavior is especially harmful to turbocharged engines. In addition, because there is no oil injected into the bearings, revving will merely keep the turbo spinning long after the engine has been turned off, wearing it out faster.

Why do some people want their cars to be loud?

You’ve most likely noticed this and thought, “Why do some people want their cars to be loud?” Especially when they rev an engine. There are several major reasons why some people enjoy their automobiles being loud:

  • It gives them a rush.
  • It allows them to show off.
  • It improves performance slightly.
  • It attracts attention.

Even though there are so many people in the world, these appear to be the most common causes.

Do cars have rev limiters?

SO, you want to rev an engine? Rev limiters are there to stop you from going overboard. And these devices tend to prohibit you from either revving to redline or holding the car at redline. However, rev limiters are a very recent invention. To avoid over-revving, the rev limiter cuts fuel flow to the engine or tinkers with the ignition system, but in any case, the system seeks to restrict revs to a safe level.

how to rev an engine
how to rev an engine

What does it mean to redline a car?

Allowing your engine to rev until it reaches the limiter is known as redlining. The numbers 0 through 10 are displayed on your tachometer, which is located on the dashboard of your car. 

Let’s go into more detail…

The numbers are multiplied by 1000 to get a speed of 1000r/min (rotations per minute). If you accelerate your car to the point where the gauge reads 3, your tires will be spinning at 3,000 rotations per minute.

A red zone can also be found on the tachometer, which usually starts around 8,000r/min. When drivers accelerate quickly enough, the gauge may enter this zone, referred to as redlining.

What Happens When You Redline A Car?

When you rev an engine, the term “redlining” will come into play. The red zone on your tachometer ensures that drivers do not allow their gauge to reach an excessive number of spins per minute. Redlining your car regularly can harm both your tires and engine. It’s possible to redline with manual-shift modes or manual gearboxes, causing your engine to wear down prematurely.

Redlining your engine now and again, on the other hand, has various advantages when done in moderation. It keeps moving parts in good working condition while highlighting any flaws that might not be visible at lower speeds. Partially clogged fuel injector nozzles and damaged spark plugs are among the problems that cause poor power delivery.

How to rev an engine: FAQ

Is hitting the rev limiter bad?

When accelerating your engine speed, the red line on the tachometer signals a driver when he is going overboard. As a result, you have exceeded the allowable revolution limit when you reach the rev limit, and you risk damaging the engine.

Should I rev match?

As long as you modify the engine speed to meet the transmission rate, rev-matching is acceptable. It is good for the engine because it puts less load on it. To pull it off correctly, learn how to rev match.

Do You Rev The Engine In Park Or Neutral?

It is best to put an automatic vehicle in park mode when revving it. When driving, though, putting it in neutral is most advisable.

How Do I Rev My Engine While Driving?

To rev an engine while driving, gently press on your brakes and shift to neutral. Next, g radically increase the accelerator pressure until the needle on the tachometer dial reaches a higher limit. 

This is for automobiles with automatic transmissions. You focus on bringing the engine speed to the transmission while rev-matching manual automobiles, resulting in a seamless transition to the desired gear. Finally, depress the clutch and step on the gas pedal.


6 responses to “How to rev an engine in a few easy steps | Complete Video Guide Included [2021]”

Leave a Reply

Your email address will not be published. Required fields are marked *